|
|
|
STANCOR MODEL LX
Features
- Non-clog, single channel impeller
Non-clog, single channel impeller has 3" spherical passage
and prevents clogging.
- Robust construction
Large diameter and short overhang shaft, rugged cast
iron construction, all fasteners of stainless steel and 4
pole motor drive.
- Double mechanical seal in oil chamber
An oil lubricated double mechanical seal system with lower
faces of hard silicon carbide provides strong and reliable
shaft sealing.
- High efficiency, energy saving
Hydraulic well designed single channel impeller gives
high efficiency and saves energy.
- Long life
Short overhanged shaft, angular contact ball bearings
and high grade mechanical seals give longer life.
- In built motor protection
Quick acting dual response overloads provide protection
against overload, lock or open phase for model 3 H.P.
Models 5 H.P. and above have miniature thermal protectors.
Applications
|
 |
Specifications
|
Items |
Standard |
Item |
Standard |
| Scope |
Discharge |
3"-6" |
Materials |
Shaft |
403 Stainless Steel |
| Motor Power |
3-30H.P. (3 phase) |
Motor Frame |
Cast Iron |
| Performance |
Capacity: To 1400 GPM
Head: to 138 FT |
Fasteners |
304 Stainless Steel |
| Liquid |
Type |
Sewage/Wastewater |
Mechanical Seal |
Upper Faces: Carbon / Ceramic
Lower Faces: Silicon Carbide / Silicon Carbide
Lubrication Oil: Turbine Oil VG32 (SAE 10W20W) |
| Temperature |
104° F |
Wearing Ring |
BC Bronze |
| Max. Solids |
Refer to table below |
Motor |
Type |
Air filled dry submersible, Ip68,
Class F insulation |
|
Submergence |
Maximum |
25FT |
Nominal Speed |
1750rpm, 4pole |
| Minimum |
Refer to water level (L.W.L.)
in dimensions |
Applicable Voltages |
460;208/230 volts 3 phase 60 Hz |
|
Construction |
Impeller |
Non-clog single channel |
Protection |
In built overload protection (3HP)
Miniature thermal protector (5-30HP) |
| Mechanical Seal |
Oil lubricated, double
mechanical seal |
Bearings |
Pre Lubricated sealed ball bearings |
|
Materials |
Casing |
Cast Iron |
Cable |
Length |
33' UL stow cable |
| Impeller |
Cast Iron |
Accessories |
Flange |
Discharge elbow with NPT
flange |
| Section Cover |
Cast Iron |
|
| Solids Handling |
Model
-Discharge
-motor HP |
80ø
(3")
All |
100ø
(4")
All |
150ø
(6")
All |
| Max. Diameter of Solids |
3" |
Accessories
|
 |
|
|
